JN Series (1-11 gph) Diaphragm Metering Pumps

Quick Specs

  • Accuracy: Metering accuracy of +/-1%. Won’t fluctuate over time.
  • Flow: 6 models ranging from 1-11 gallons per hour
  • Pressure: up to 250 psi
  • We use standard motors! 56C Frame – 1/3 HP – 60 Hz
Options: Inverter Duty, Washdown Duty, Explosion Proof, 50 Hz, 3 Phase, Mill & Chem Duty
  • Simplex, Duplex, and Triplex options (number of pumping heads)

These proven, rugged, accurate pumps are used in many industrial plants for injecting a controlled flow of highly reactive liquids. Heavy duty industrial grade construction means those little pumps will deliver many years of trouble free 24-7-365 pumping.

JN Series Literature

JN Series Data Sheet
JN Series Operators Manual
DIMENSIONAL DRAWING - SIMPLEX

Features

  • JN Series Pumps are designed for especially low rates. Double ball checks with Teflon valve seats assure ±1% steady slate repeatable accuracy over a 10:1 turndown range.
  • Manual output control knob is located on top of the pump for easy access.
  • Automatic pump output control is available for pumps equipped with a variable speed motor.
  • Industrial grade worm gear reducer is permanently lubricated and C face mounted to the motor. Precision internal pump parts run in an oil bath for extended service life. No external lubrication required.}
  • Double diaphragm option is available for superior protection from dangerous liquids.
  • When equipped with the proper materials the JN Series pumps are excellent for pumping dangerous liquids such as acids, caustics and solvents.
  • Tough fabric reinforced rubber diaphragms protect the drive train from the pumped liquid. The short .090″ stroke with 2″ diameter piston increased diaphragm life by reducing fatigue.

JN Series Pumps, Simplex (One Pumping Head)

Model No. Max GPH (L) per head Max PSI Strokes per minute HP Piping NPT
JN101A 1(3.8) 250 22 1/3 1/4″
JN102A 2(7.6) 250 44 1/3 1/4″
JN104A 4(15.1) 250 88 1/3 1/4″
JN105A 5(18.9) 250 115 1/3 1/4″
JN107A 7(26.5) 250 172 1/3 1/4″
JN111A 11(42) 250 230 1/3 1/4″

JN Series Pumps, Duplex (Two Pumping Head)

Model No. Max GPH (L) per head Max PSI Strokes per minute HP Piping NPT
JN201A 1(3.8) 250 22 1/3 1/4″
JN202A 2(7.6) 250 44 1/3 1/4″
JN204A 4(15.1) 250 88 1/3 1/4″
JN205A 5(18.9) 250 115 1/3 1/4″
JN207A 7(26.5) 250 172 1/3 1/4″
JN211A 11(42) 250 230 1/3 1/4″

Wetted end materials to resist corrosion and abrasion

Solution head and valve bodies Diaphragm Backup Diaphragm Valve balls Valve seats
PVC Neoprene Neoprene 316 SS Teflon
Teflon/Kynar Teflon Faced Viton Ceramic 316 SS
316 SS Hypalon Hastelloy C
Viton Teflon

Metering Pump Selection Guide

For the cleanest and easiest way to inquire about a Madden metering pump, download this fillable pump selection guide, fill it out, and upload it through the RFQ section of our website. We take pride in responding promptly!

Madden Metering Pump Selection Guide

Request a Quote

We take pride in responding promptly

Get a quote

Related Products